BAOSTEEL Australia

Journal papers

Ding, S., Meehan, P.A. and Daniel, W.J.T., (2011). A novel sheet metal forming method—Millipede forming, Journal of Materials Processing Technology, 211, 376-381.

Jood, P., Mehta, R.J., Zhang, Y., Peleckis, G., Wang, X., Siegel, R.W., Borca-Tasciuc, T., Dou, S.X. and Ramanath, G., (2011). Al-Doped Zinc Oxide Nanocomposites with Enhanced Thermoelectric Properties, Nano Letters, 11, 4337-4342.

Jood, P., Peleckis, G., Wang, X. and Dou, S.X., (2012). Effect of gallium doping and ball milling process on the thermoelectric performance of n-type ZnO, Journal of Materials Research, 27, 2278-2285.

Yan, M., Liu, Y., Liu, Y.B., Kong, C., Schaffer, G.B. and Qian, M., (2012). Simultaneous gettering of oxygen and chlorine and homogenization of the β phase by rare earth hydride additions to a powder metallurgy Ti–2.25 Mo–1.5Fe alloy, Scripta Materialia, 67, 491-494.

Chen, X.B., Easton, M.A., Yang, H.Y., Abbott, T.B. and Birbilis, N., (2013). Corrosion resistant conversion coatings for magnesium alloys, in: Song, G.L. (Ed.), Corrosion Prevention of Magnesium Alloys. Woodhead Publishing.

Chen, X.B., Easton, M.A., Yang, H.Y., Abbott, T.B. and Birbilis, N., (2013). Corrosion resistant electrochemical platings on magnesium alloys, in: Song, G.l. (Ed.), Corrosion Prevention of Magnesium Alloys. Woodhead Publishing.

Cheng, X.W., Jiang, Z.Y., Wei, D.B., Hao, L., Zhao, J.W., Peng, J.G., Lu, S.Z. and Jiang, L., (2013). Effect of water vapor on oxidation of ferritic stainless steel 21Cr- 0.6Mo-Nb-Ti in simulated reheating environment, Advanced Materials Research, 690-693, 280-289.

Tian, R., Donelson, R., Ling, C.D., Blanchard, P.E.R., Zhang, T., Chu, D., Tan, T.T. and Li, S., (2013). Ga Substitution and Oxygen Diffusion Kinetics in Ca3Co4O9+δ-Based Thermoelectric Oxides, The Journal of Physical Chemistry C, 117, 13382-13387.

Wang, D.-W., Zeng, Q., Zhou, G., Yin, L., Li, F., Cheng, H.-M., Gentle, I.R. and Lu, G.Q.M., (2013). Carbon-sulfur composites for Li-S batteries: status and prospects, Journal of Materials Chemistry A, 1, 9382-9394.

Yamini, S.A., Ikeda, T., Lalonde, A., Pei, Y., Dou, S.X. and Snyder, G.J., (2013). Rational design of p-type thermoelectric PbTe: Temperature dependent sodium solubility, Journal of Materials Chemistry A, 1, 8725-8730.

Yan, M., Liu, Y., Schaffer, G.B. and Qian, M., (2013). In situ synchrotron radiation to understand the pathways for the scavenging of oxygen in commercially pure Ti and Ti–6Al–4V by yttrium hydride, Scripta Materialia, 68, 63-66.

Zamri, W., Kosasih, P.B., Tieu, A.K., Zhu, H. and Zhu, Q., (2013). Finite Element Modeling of the Nanoindentation of Layers of Porous Oxide on High Speed Steel, Steel Research International, 84, 1309-1319.

Zhang, Y.K. and Ding, S.C., (2013). Parametric study on chain-die forming for advanced high strength steels, International Journal of Materials & Product Technology, 47, 138-149.

Zhu, H., Zhu, H., Zhu, Q., Kosasih, B. and Tieu, A.K., (2013). Investigation on mechanical properties of high speed steel roll material by nanoindentation, Materials research innovations, 17, s35-s39.

Zhu, H., Zhu, Q., Tieu, A.K., Kosasih, B. and Kong, C., (2013). A simulation of wear behaviour of high-speed steel hot rolls by means of high temperature pin-on-disc tests, Wear, 302, 1310-1318.

Chen, C., Zhang, T., Donelson, R., Chu, D., Tian, R., Tan, T.T. and Li, S., (2014). Thermopower and chemical stability of Na0.77CoO2/Ca3Co4O9 composites, Acta Materialia, 63, 99-106.

Chen, X.Q., Li, Z., Yang, J.P., Sun, Q. and Dou, S.X., (2014). Surfactant-free Preparation of Copper Selenide Nanowires and Their Thermoelectric Properties, J. Phys. Chem. C.

Cheng, X., Jiang, Z., Wei, D., Zhao, J., Monaghan, B.J., Longbottom, R.J. and Jiang, L., (2014). Characteristics of oxide scale formed on ferritic stainless steels in simulated reheating atmosphere, Surface and Coatings Technology, 258, 257-267.

Cheng, X., Jiang, Z.Y. and Wei, D.B., (2014). Effects of oxide scale on hot rolling of an austenitic stainless steel, International Journal of Surface Science and Engineering, 8, 173-187.

Chu, D., Lashgari, H., Jiang, Y., Ferry, M., Laws, K., Xie, S., Sun, H. and Li, S., (2014). Recent progress in high Bs and low Hc Fe-based nanocrystalline alloys, Nanotechnology Reviews, 3, 153-159.

Han, C., Li, Z. and Dou, S., (2014). Recent progress in thermoelectric materials, Chinese Science Bulletin, 59, 2073-2091.

Han, C., Li, Z., Li, W., Chou, s. and Dou, S.X., (2014). Controlled Synthesis of Copper Telleride Nanostructures for Long-cycling Anode in Lithium Ion Batteries, Journal of Materials Chemistry A, 2, 11683-11690.

Hao, L., Jiang, Z., Wei, D. and Zhao, Y., (2014). Effect of extreme pressure agents on the anti-scratch behaviour of high-speed steel material, Tribology international, 81, 19-28.

Hou, Q.-F., Samman, M., Li, J. and Yu, A.-B., (2014). Modeling the Gas-solid Flow in the Reduction Shaft of COREX, ISIJ international, 54, 1772-1780.

Hou, Q.F., Hou, Q.F., Dong, K.J. and Yu, A.B., (2014). DEM study of the flow of cohesive particles in a screw feeder, Powder technology, 256, 529-539.

Konarova, M., Tang, F., Chen, J., Wang, G., Rudolph, V. and Beltramini, J., (2014). Nano- and microscale engineering of the molybdenum disulfide-based catalysts for syngas to ethanol conversion, ChemCatChem, 6, 2394-2402.

Lashgari, H.R., Chu, D., Xie, S., Sun, H., Ferry, M. and Li, S., (2014). Composition dependence of the microstructure and soft magnetic properties of Fe-based amorphous/nanocrystalline alloys: A review study, Journal of Non-Crystalline Solids, 391, 61-82.

Luo, S.D., Qian, M. and Imam, M.A., (2014). Microwave sintering of titanium and titanium alloys, in: Qian, M., Froes, F.H. (Eds.), Titanium Powder Metallurgy: Science, Technology and Applications, pp. 237-251.

Luo, S.D., Yang, Y.F., Schaffer, G.B. and Qian, M., (2014). Warm die compaction and sintering of titanium and titanium alloy powders, Journal of Materials Processing Technology, 214, 660-666.

Sun, K., Su, Z., Yan, C., Liu, F., Cui, H., Jiang, L., Shen, Y., Hao, X. and Liu, Y., (2014). Flexible Cu2ZnSnS4 solar cells based on successive ionic layer adsorption and reaction method, RSC Advances, 4, 17703-17708.

Tian, R., Zhang, T., Chu, D., Donelson, R., Tao, L. and Li, S., (2014). Enhancement of high temperature thermoelectric performance in Bi, Fe co-doped layered oxide-based material Ca3Co4O9+δ, Journal of Alloys and Compounds, 615, 311-315.

Wu, C., Zhang, L., Li, S., Jiang, Z. and Qu, P., (2014). A novel multi-scale statistical characterization of interface pressure and friction in metal strip rolling, International Journal of Mechanical Sciences, 89, 391-402.

Zhong, Y.L., Tian, Z., Simon, G.P. and Li, D., (2014). Scalable production of graphene via wet chemistry: progress and challenges, Materials Today, In Press. DOI: 10.1016/j.mattod.2014.08.019.